Guide to Using Salt-Shark Products

Comprehensive Guide to Using Salt-Shark Products

Salt-Shark offers a range of products designed to effectively remove salt and protect your equipment from corrosion. Below is a detailed guide on how to use each product, ensuring optimal performance and longevity.

1. Salt Remover Concentrates

These super-concentrated formulas provide an efficient solution for removing salt from various surfaces.

• Inspect for Salt Exposure: Regularly check surfaces for signs of salt. Even if not visible, salt may still be present after exposure to marine environments.

• Measure the Concentrate: Follow the instructions on the sprayer container to add the appropriate amount of Salt-Shark concentrate.

• Apply the Foam: Using a Salt-Shark sprayer, cover the entire surface with the foamy solution, ensuring complete coverage.

• Rinse Thoroughly: Disconnect the sprayer and rinse the surface with fresh water. Adjust the nozzle to achieve the desired rinsing pressure.

• Dry for a Spot-Free Finish: For optimal results, dry the surface with a Salt-Shark drying towel to prevent water spots.

2. Salt-Shark Foam Sprayer

This sprayer simplifies the application process with a one-switch foaming mechanism.

• Prepare the Solution: Fill the sprayer container with the specified amount of fresh water as indicated on the container.

• Add Concentrate: Add the recommended number of pumps of Salt-Shark concentrate to the water.

• Mix the Solution: Shake the container until the water changes color, indicating thorough mixing.

• Apply the Foam: Turn the switch upward to select foam mode and spray the solution onto the surface.

• Rinse Off: Unclip the main body of the sprayer to rinse the surface with fresh water.

3. Engine Flush Adapter

Designed for flushing outboard engines, this adapter ensures internal components are free from salt buildup.

• Fill with Fresh Water: Fill the Engine Flush Adapter container with fresh water.

• Add Concentrate: Add one pump of Salt-Shark concentrate to the water.

• Mix the Solution: Shake the container until the water changes color, indicating proper mixing.

• Attach to Engine: Connect a freshwater hose to the adapter and attach it to the engine using flusher muffs or by connecting directly.

• Flush the Engine: Start the engine, turn the adapter to the water setting, and then switch to the desired soap setting (small, medium, or large dot). Allow the solution to flush through for approximately 30 seconds.

4. Equipment Protector

Ideal for safeguarding fishing gear, snorkels, drones, and other marine equipment from salt corrosion.

• Spray the Equipment: Apply the ready-mix solution directly onto salt-exposed equipment.

• Let It Sit: Allow the solution to soak for 30 seconds to effectively break down salt deposits.

• Rinse Thoroughly: Rinse the equipment well with fresh water to remove loosened salt and any residual solution.

5. Underbody Sprayer

A specialized tool for cleaning the undercarriage of vehicles exposed to salt.

• Assemble the Sprayer: Connect the two pieces of the sprayer by screwing them together and clip the stainless steel poles together.

• Prepare the Solution: Fill the sprayer's container with fresh water and add one or two pumps of Salt-Shark Vehicle Salt Remover.

• Mix the Solution: Shake the container until the water changes color, ensuring the concentrate is well mixed.

• Activate the Sprayer: After attaching the sprayer to the angled stainless steel pole, wheel it under the vehicle. Use your thumb to pull down on the switch and begin spraying.

• Apply the Foam: Cover all underbody surfaces with the foam. One pump provides over five minutes of spraying time, sufficient for multiple vehicles.

• Optional Rinsing: There is no need to rinse the underbody; leaving the solution on ensures maximum rust protection. However, rinse off shiny surfaces for a streak-free finish.

6. Drying Towel

For achieving a water spot-free finish on cleaned surfaces.

• Dry the Surface: Throw or slide the towel over any surface to dry it instantly, leaving a spotless finish.

By following these detailed instructions, you can effectively utilize Salt-Shark products to protect your equipment and vehicles from the damaging effects of salt exposure. Salt Shark